Ahmed, N. (2017). Improving the Functional Properties of Endless Felt Blanket Used in Transfer-Printing Machines. International Design Journal, 7(1), 225-236. doi: 10.12816/0049420
Nahla Fawzy Ahmed. "Improving the Functional Properties of Endless Felt Blanket Used in Transfer-Printing Machines". International Design Journal, 7, 1, 2017, 225-236. doi: 10.12816/0049420
Ahmed, N. (2017). 'Improving the Functional Properties of Endless Felt Blanket Used in Transfer-Printing Machines', International Design Journal, 7(1), pp. 225-236. doi: 10.12816/0049420
Ahmed, N. Improving the Functional Properties of Endless Felt Blanket Used in Transfer-Printing Machines. International Design Journal, 2017; 7(1): 225-236. doi: 10.12816/0049420
Improving the Functional Properties of Endless Felt Blanket Used in Transfer-Printing Machines
Assistant professor spinning and weaving dept., Faculty of Applied Arts / Helwan University, Egypt
Abstract
Technical textiles are the textile materials and products manufactured primarily for their technical and performance properties. Endless felt blanket is one of the technical textile which named Nomex endless felt, also called Nomex blanket or sublimation felt. This blanket is a very important part of printing process and has direct effect on printed image quality. The purpose of the sublimation felt is to press the fabric against the printed-paper and both against the heated calendar. The contact between the fabric and the printed paper needs to be long enough, to ensure the transfer of the dyestuffs to the fabric, using high temperatures (up to 230º C / 450º F), or less than 250º C. At the end of usage.The problem of this research is the repetitive exchange for the endless felt blanket on Transfer printing machines due to the long working hours that reaches to 18 Hrs. per day. The continuous rotational motion expose the endless felt blanket to tensile strength , elongation, compression force, abrasion and high temperatures ( 230 )° c . This leads to exchange it every 3 or 4 months which considered tremendous financial cost especially with rapid cost increasing of both Nomix fibers and it's importation cost . The objective of the paper has been: to produce the nonwoven endless felt blanket suitable for using in the transfer printing machine with high tensile strength, low elongation at break, high abrasion resistance, high compression force resistance, high dimensional stability and high heat resistance, and to produce endless felt blanket with longer consumption period that exceeds 12 months by improving Its properties by supporting the material with 3 or 4 layers of woven instead of 1 or 2 layers. The obtained test results are presented and discussed. The sample made of 100% Nomix with ( 3400 g/m² , puncture depth 13 mm ) achieved the best results.
Rene’ L.W MuTsaerTs Executive Member MuTiMEX “http://www.muTimex.coza 2005.
Michael syverson, “ The heat on Dye sublimation” July 2012.
M. Stephan Kova, J., Gregr and J., Wiene “Using of DSCBD plasma for treatment of Kevlar and Nomex fibers” chemlisty 102,s1515-s1518, 2008.
Suf, Zhangz, GuoF, SongH, liu W. Wear 261, 293, 2006.
ASTM-D4595-83, “Standard test method for measuring tensile strength and elongation at break in both directions.
ASTU-D4158-79, “Standard test method for measuring fabric abrasion resistance was determined in accordance with their lost of weight at 2000 cycle (%).
ASIM-D35+4-03 “standard test method for measuring fabric compression force was determined in accordance with their lost of thickness (%).
ASTM-DI111 “Standard test method for measuring fabric
View on SCiNiTO
Top