zayed, A., Herbid, S., Fahmy, S. (2024). Nanotechnology and its role in product sustainability. International Design Journal, 14(4), 157-170. doi: 10.21608/idj.2024.285499.1141
Ahmed Mohamed zayed; Shorok Mohamed Herbid; Sarah Fathy Fahmy. "Nanotechnology and its role in product sustainability". International Design Journal, 14, 4, 2024, 157-170. doi: 10.21608/idj.2024.285499.1141
zayed, A., Herbid, S., Fahmy, S. (2024). 'Nanotechnology and its role in product sustainability', International Design Journal, 14(4), pp. 157-170. doi: 10.21608/idj.2024.285499.1141
zayed, A., Herbid, S., Fahmy, S. Nanotechnology and its role in product sustainability. International Design Journal, 2024; 14(4): 157-170. doi: 10.21608/idj.2024.285499.1141
Nanotechnology and its role in product sustainability
1Industrial Design Department, Faculty of Applied Arts, Damietta University, Egypt.
2Faculty of Applied Arts, Damietta University, Department of Industrial Design.
3Interior design and Furniture Department, Faculty of Applied Arts, Damietta University.
Abstract
The research revolves around activating the role of modern technologies as a solution for developing products to achieve sustainability. Nanotechnology is considered one of the most important technologies that work on developing material properties and creating new materials. The problem addressed by the research is the failure to achieve sustainability in the design of some products due to the prevalence of many commonly used traditional products made from environmentally harmful materials and production methods that do not meet sustainability standards and represent a burden on the environment that is difficult to address. The research discussed the concept and importance of sustainability in product design, the historical development of material use in product design, and the development of new material properties in product design. It also discussed nanotechnology, nanomaterials, and their impact on developing product properties. Can new materials be used through nanotechnology to develop products and support them with properties that achieve sustainability? The research also aims to demonstrate how sustainability can be achieved in product design by transforming environmentally harmful traditional products into sustainable products by replacing harmful materials with new nanomaterials. It sheds light on the role of nanotechnology and the resulting nanomaterials in achieving sustainability in product design by developing their properties.
1- Abdul Kareem, E. A. (2019). The Concept of Sustainable Design and Its Impact on the Quality of Interior Design Environment. Architecture, Arts, and Humanities Journal.
2- Abdulhamid, D. K. (2018). Considerations for Achieving the Concept of Sustainable Design in Industrial Design. Architecture and Arts Journal, Issue 11, Part 1.
3- Abouelsoud, A. M. (2019). The strategies of sustainable design for a better product design future. Journal of Applied Art and Science.
4- Abu Ghneimah, W. A., Mustafa, S. N.-D., & El-Saadani, N. O. (2023). Sustainability in product design and its applications on the packaging of organic food products. Journal of Architecture, Arts, and Humanities, Vol. 8, No. 38.
5- Ahmed, M. S., & Hassanein, T. K. (2022). Sustainable materials in industrial lighting units. International Design Journal.
6- Al-Amayreh, A. (2015). Interior Design and Decoration Engineering. Amman: Dar Al-Amal, First Edition.
7- Al-Ashmaawi, S. A. (2016). Nanotechnology in enhancing the functional performance of sportswear. International Design Journal, Volume 6, Issue 2.
8- Al-Eskandarani, M. S. (2010). Nanotechnology: for a Better Tomorrow. Kuwait: World of Knowledge series.
9- Al-Habshi, N. A. (2011). What is Nanotechnology? Saudi Arabia: King Fahd National Library Catalog.
10- Awad, A. M. (1992). Requirements for Selecting Design Materials in the Field of Engineering Product Design. Journal of Sciences and Arts.
11- Fadel, A. A., & Alkhalef, N. A. (2021). The role of nanotechnology in achieving the dimensions of sustainable development. Journal of Management and Economics, Issue 129.
12- Farid, A. E., Abu Ghazala, A. A., & Al-Shami, A. A.-M. (2015). Smart and Nanomaterials in Construction: An Introduction to Enhance the Efficiency and Integration of Smart Buildings. Jazan University Journal, Applied Sciences Branch.
13- Hashem, E. M., & Alsindioni, K. F. (2015). Modern Trends in Design and Their Role in Reducing Solid Environmental Waste Resulting from Use. ournal of Applied Sciences and Arts.
14- Ibrahim, Z. S. (2020). Nanotechnology treatments for wooden materials and their use in interior design technology. Journal of Architecture, Arts, and Humanities Sciences.
15- Imam, M. H. (2013). Intellectual Transformations in Interior Design and Furniture during the 21st Century. Vol. 1 of the Scientific Journal of the Third International Conference of the Faculty of Applied Arts.
16- Kamel, D. M. (2016). Sustainable Furniture as a Dominant Trend for the Third Millennium. Journal of Applied Sciences and Arts.
17- Mehran, S. A.-S. (2014). Nanotechnology and its impact on furniture production. Al-Amara wa Al-Funun, no. 14.
18- Mohammed, D. Y. (2013). Technology of modern adhesives used in interior design. https://www.researchgate.net/publication/333677983.
19- Mohammed, O. Y. (2019). Environmental Scenario as an Approach to Achieving Sustainability in Product Design. Journal of Architecture, Arts, and Humanities, 49.
20- Nafea, M. A. (2018). Smart Materials Technology in Functional Systems for Industrial Design Products. International Journal of Design.
21- Naseer, R. A. (2017). The impact of sustainability and advanced technology on interior design and furniture for temporary facilities. Journal of Applied Sciences and Arts.
22- National Nanotechnology Initiative. (2023, April 24). Retrieved from https://www.nano.gov: https://www.nano.gov/about-nanotechnology/applications-nanotechnology
23- Sabry, A. M. (2020). New Materials Produced by Nanotechnology and Their Industrial Applications in Product Design. International Design Journal.
Sherif, F. A.-M., Khalil, M. K., & Ahmed, N. S. (2017). Building Construction and Nanotechnology: A New Vision for Architecture. International Design Journal, Volume 7, Issue 1.
View on SCiNiTO
Top