Yassen, H. (2017). Study of the Relationship between sewing and fabric Parameters and Seam Strength. International Design Journal, 7(2), 125-129. doi: 10.12816/0046559
Hazem Abdelmoneim Yassen. "Study of the Relationship between sewing and fabric Parameters and Seam Strength". International Design Journal, 7, 2, 2017, 125-129. doi: 10.12816/0046559
Yassen, H. (2017). 'Study of the Relationship between sewing and fabric Parameters and Seam Strength', International Design Journal, 7(2), pp. 125-129. doi: 10.12816/0046559
Yassen, H. Study of the Relationship between sewing and fabric Parameters and Seam Strength. International Design Journal, 2017; 7(2): 125-129. doi: 10.12816/0046559
Study of the Relationship between sewing and fabric Parameters and Seam Strength
Faculty of Education, Helwan University, Cairo, Egypt
Abstract
Seam performance plays a vital role in the quality of clothing products. Seam strength is one of the key parameter to seam performance. This study aimed at studying the effects of sewing parameters: thread count (59/2 dtex, 35/2 Nm and 20/2 Nm), sewing needle size (14, 16 and 18 of Singer system) and stitch density (3, 5 and 7 stitches/cm) as well as fabric characteristics: yarn count (10/1, 20/1 and 30/1 Ne) and weft density (20, 21 and 22 picks / cm). The results of Analysis of variance of the main findings of this study revealed that seam strength is significantly and positively affected by both sewing and fabric characteristics. A value of correlation coefficient 0.97 was obtained for regression lines between needle size and seam strength and a value 0.99 between sewing thread count and the seam strength.
1-Gurarda, B. Meric, The Effects of Elastane Yarn Type and Fabric Density on Sewing Needle Penetration Forces and Seam Damage of PET/Elastane Woven Fabrics. Journal of Textile and Apparel Technology and management, Volume 6, Issue 3, Springer 2010.
2-Vaida Dobilaite and Milda Juciene, The influence of mechanical properties of sewing threads on seam pucker., International Journal of Clothing Science and Technology, Vol. 18 No. 5, 2006, pp. 335-345.
3-Carr H. and Latham B., Technology of Clothing Manufacturing, (BSP Professional Books, Oxford), 1992.
4-Midha, V.K., Mukhopadhyay, A., Kaur, R., An approach to seam strength prediction using residual thread strength, Research Journal of Textile and Apparel, 2009.
5-Elhadidy Adel and Alsaid A.Almetwally Subjective Evaluation of Garment. Journal of Textile Asia, Agu 2010
6-Ayca Gurarda ., Investigation of the Seam Performance of PET/ Nylon-elastane Woven Fabrics. Textile Research Journal Vol 78(1): 21–27, 2008.
7-Behera, B. k. and Sharma, S. Low Stress Behavior and Sewability of Suiting and Shirting Fabrics. Indian Journal of Fiber and Textile Research. 1998, 23 (4), 233-241.
8-Choudhury, P. K. Improvement in Seam Performance of Jute bags. Indian Journal of Fiber and Textile Research. 2000, 25(3), 206-210.
9-Ukponmwan, J. O., Mukhopadhyay, A., and Chatterjee, K. N., “Sewing Thread,” The Textile Institute, 91, 168–171 (2000).
10-Bhatnagar et al. Coton sewing thread and siro system. Indian Textile Journal, 1991, 102 (2), 30- 31.
11-Ibrahima N.A.,, A. Amr, B.M. Eid, A.A. Almetwally, M.M. Mourad Functional finishes of stretch cotton fabrics. Journal of Carbohydrate Polymers, 98 (2013) 1603– 1609.
12-Alsaid Ahmed Almetwally and M.M. Mourad. Effects of spandex drawing ratio and weave structure on the physical properties of cotton/spandex woven fabrics. The Journal of the Textile Institute, 2014, Vol. 105, No. 3, 235-245.
13-Alsaid Ahmed Almetwally, H. F. Idrees and Ali Ali Hebeish. Predecting the Tensile Properies of cotton/ spandex core-spun yarns using Artificial Neural networks and regression models. The Journal of the Textile Institute, 2014, Vol. 105, No. 11, 1221-1229.
14-Saad M.A., M.M. sabry and Alsaid Ahmed Almetwally. A study of Some Fabric and Fiber Parameters That Affect Air Filters Efficiency. Journal of textile Asia, Vol. 45, No. 4, May, 2014, 38-41.
15-Behera, B. K., Evaluation and selection of sewing thread. Textile Trends, 1997, 39 (12), 33-42.
16-Miguel et al. Fabric design considering the optimization of seam slippage0 International Journal Clothing of Science and Technology, 2005, 17 (3/4), 225-231.
View on SCiNiTO
Top