Abu Nassif, N. (2019). Dimensional Stability, Aesthetic and Functional Properties of Cotton:Polyester Blended Knitted Fabrics with Different Structures. International Design Journal, 9(4), 23-29. doi: 10.21608/idj.2019.82542
Najwa Ali Abu Nassif. "Dimensional Stability, Aesthetic and Functional Properties of Cotton:Polyester Blended Knitted Fabrics with Different Structures". International Design Journal, 9, 4, 2019, 23-29. doi: 10.21608/idj.2019.82542
Abu Nassif, N. (2019). 'Dimensional Stability, Aesthetic and Functional Properties of Cotton:Polyester Blended Knitted Fabrics with Different Structures', International Design Journal, 9(4), pp. 23-29. doi: 10.21608/idj.2019.82542
Abu Nassif, N. Dimensional Stability, Aesthetic and Functional Properties of Cotton:Polyester Blended Knitted Fabrics with Different Structures. International Design Journal, 2019; 9(4): 23-29. doi: 10.21608/idj.2019.82542
Dimensional Stability, Aesthetic and Functional Properties of Cotton:Polyester Blended Knitted Fabrics with Different Structures
Fashion Design Department, Design and Art College, Jeddah University, Jeddah, Saudi Arabia
Abstract
Throughout this study, functional, aesthetic, and dimensional stability properties of knitted blended fabrics were experimentally presented. An experimental work was introduced to examine. In order to investigate the loop length of the knitted fabrics and the polyester blending ratio on bursting, air permeability, pilling resistance and shrinkage ratio of knitted fabrics, thirty fabric samples were knitted with three loop length, five levels of polyester ratios for single jersey and rib knit structures. Analysis of variance and regression analysis were used to detect the influence of loop length and polyester content on knitted fabric properties. The findings of this study revealed that independent variables under study have a massive influence on the functional and aesthetic properties of the knitted blended fabrics.
1- Sabina Yesmin, Modashar H asan, Md. Salam Miah, Farhana Momotaz, Mohammad Arafat Idris and Md. Rashedul Hasan. Effect of Stitch Length and Fabric Constructions on Dimensional and Mechanical Properties of Knitted Fabrics. World Applied Sciences Journal 32 (9): 1991-1995, 2014
2- Mikuèionienë, D. and G. Laureckienë, 2009. The influence of drying conditions on dimensional stability of cotton weft knitted fabrics. Material Science, 15(1): 64-68.
3- Murugesh Babu. K and Selvadass. M. Influence of wet processing on properties of single jersey knitted fabrics. International Journal of Fiber and Textile Research, 3(1), 2013, 18-30.
4- Elias Khalil and Md. Solaiman. Effect of stitch length on physical and mechanical properties of single jersey cotton knitted fabric. International Journal of Science and Research, 3(9), 2014.
5- Ramakrishnan, G. et al. An investigation of the properties of knitted fabrics made from viscose microfibers. Journal of Textile and Apparel Technology and Management, 6(1), 2009.
6- Edin Fatkić, Jelka Geršak and Darko Ujević. Influence of knitting parameters on the mechanical properties of plain jersey weft knitted fabrics. FIBRES & TEXTILES in Eastern Europe 2011, 19(5), 87-91.
7- Levent O. and Cevza C. Contribution of fabric characteristics and laundering to shrinkage of weft knitted fabrics. Textile Research Journal, march, 2003.
10- Nergiz Emirhanova, Yasemin Kavusturan. Effects of knit structure on the dimensional and physical properties of winter outerwear knitted fabrics. FIBRES & TEXTILES in Eastern Europe April / June 2008, Vol. 16, No. 2 (67)
11- Prakash C., et al. The effect of loop length and yarn linear density on the thermal properties of bamboo knitted fabrics. AUTEX Research Journal, Vol. 11, No4, December 2011
13- Sabina Y., et al. Effect of stitch length and fabric constructions on dimensional and mechanical properties of knitted fabrics. World Applied Sciences Journal 32 (9): 1991-1995, 2014.
14- N. A. Ibrahim, A. Amr, B. M. Eid, A. A. Almetwally, M. M. Mourad. Functional finishes of stretch cotton fabrics. Journal of Carbohydrate Polymers, 98, 2013, 1603– 1609.
15- Elias Khalil and Md. Solaiman. Effect of stitch length on physical and mechanical properties of single jersey cotton knitted fabric. International Journal of Science and Research (IJSR), 3(9), 2014.
16- Nabil A. Ibrahim, Basma M. Eid, Heba M. Khalil, Alsaid A. Almetwally. A new approach for durable multifunctional coating of PET fabric. Applied Surface Science, Vol. 448, 2018, 95-103. https://doi.org/10.1016/j.apsusc.2018.04.022.
17- Alsaid Ahmed Almetwally. Multiobjective optimization of woven fabric parameters using Taguchi – Grey relational analysis. Journal of Natural fibers, 2019.
19- - Alsaid Ahmed Almetwally, H. F. Idrees and Ali Ali Hebeish. Predecting the Tensile Properies of cotton/ spandex core-spun yarns using Artificial Neural networks and regression models. The Journal of the Textile Institute, 2014, 105(11), 1221-1229
20- Alsaid Ahmed Almetwally, M. M. Mourad , Ali Ali Hebeish and Mohamed A. Ramadan.
Comparison Between Physical Properties of Ring-Spun Yarn and Compact Yarns Spun from Different Pneumatic Compacting systems. Indian Journal of Fibers and Textile Research, 40, March 2015, 43-50
21- Alsaid Ahmed Almetwally, M. M. Mourad and Ali Ali Hebeish. Some handle Properties of Cotton fabrics woven from Ring Spun Yarn and Compact Yarns Spun from Different Pneumatic Compacting Systems. Textile Association journal, 76 (4), November-December, 222-228, 2015
22- Alsaid Ahmed Almetwally. Dynamic stresses measurement of Warp yarns on Sulzer weaving machine using strain gauge.Journal of the Textile Association, 2019,