Yacout, S., Ahmed, S., Sayed, S. (2025). The impact of using 3D programs on controlling the quality of patterns in the sample department of ready-made garment Factories. International Design Journal, 15(4), 79-88. doi: 10.21608/idj.2025.371893.1302
Salma Hani Yacout; Shimaa Ahmed; Seham Sayed. "The impact of using 3D programs on controlling the quality of patterns in the sample department of ready-made garment Factories". International Design Journal, 15, 4, 2025, 79-88. doi: 10.21608/idj.2025.371893.1302
Yacout, S., Ahmed, S., Sayed, S. (2025). 'The impact of using 3D programs on controlling the quality of patterns in the sample department of ready-made garment Factories', International Design Journal, 15(4), pp. 79-88. doi: 10.21608/idj.2025.371893.1302
Yacout, S., Ahmed, S., Sayed, S. The impact of using 3D programs on controlling the quality of patterns in the sample department of ready-made garment Factories. International Design Journal, 2025; 15(4): 79-88. doi: 10.21608/idj.2025.371893.1302
The impact of using 3D programs on controlling the quality of patterns in the sample department of ready-made garment Factories
1Faculty of Applied Arts Helwan University (freelance fashion designer)
2Assistant professor in Apparel Department Faculty of Applied Arts Helwan University
3Instructor in the Department of Apparel and Fashion Design Faculty of Applied Arts Tanta University
Abstract
The use of advanced technology in clothing production gives the product the opportunity to be at the front of competitors, as 3D technology is considered one of the pattern digital technologies that help this technology to increase ease and speed of completion of industrial processes.The research problem appears in: To what extent will the use of 3D programs contribute to reducing the cost and time of sample production compared to manual methods? To what extent does the sample executed by 3D programs match the initial design? Is it possible to implement the entire sample using 3D programs and dispense the physical sample? The importance of the research lies within the following points: benefiting from modern technology in increasing sample control and predicting model defects and modifying them, reducing the number of initial samples carried out as a result of the large number of modifications to them and increasing the speed of decision making, benefiting from these programs and using them in the sample department to reduce time. Implementing it and reducing wasted materials. The research aims to: concentrating on the use of 3D programs and integrating them into traditional operating stages, obtaining the optimal method for integrating the use of 3D programs into traditional operating stages. A three-dimensional program was used to draw a number of (10) designs for soiree dresses. A questionnaire was designed to evaluate the proposed designs and was presented to a number of (15) arbitrators of specialists.
1- Ibrahim. Shaimaa Mustafa Mubarak.(2019). "The Effectiveness of the Reflected Learning Strategy to Acquire Computer Skills in the Garment Industry (Gerber Accumark) ", Scientific Journal of Educational and Qualitative Studies and Research, Issue(10). 2- Abu Hashimah. Osama Hussein.(2009): "The Use of Computers in Preparing a Specialized Program for Predicting the Subitability of Fabrics", unpublished doctoral thesis, Faculty of Home Economics, Helwan University. 3- Al-Barbari. Ahmed Fahim, Ibrahim. Noha Magdy. (2023). "Utilizing of virtual simulation to fitting the industrial pattern, prototyping section, in Garment Factories" "Case Study", Journal of Architecture, Arts, and Human Sciences, Volume(8), Issue (37). 4- Hasona. Amr Mohammed Gamal El-din Mohamed, Ahmed. Nesrin Nasr El-din, Ahmed. Doaa Mohamed Mahmoud.(2021). "Paint 3D digital environment applications as a source for fashion design inspired by the Egyptian heritage", Journal of Architecture, Arts, and Human Sciences, Issue (29). 5- Rizk. Sawsan Abdul latif. (2001). The Computer in the Clothing Industry ,Dar Al-Kutub,Cairo. 6- Sleem. Mogeda Mamoon Mohammed Raslan, Al-Sakhawi. Shaimaa Abdul Moneim.(2021). "Building the Basic Models Pattern For Women" , Egyptian Book and Documents House. 7- Abd El-jawad. Sherif Mohamed El-sayed. (2018): "The Effectiveness of Hypermedia to build sample pattern of knitted According to customerʼs specifications menʼs outerwear" , Masterʼs thesis, Faculty of Home Economics, Helwan University. 8- Abdul Fattah.Tarek Mohammed .(2005): "Preparation of a training program in the field of designing and implementing the first sample of jeans using a computer" , unpublished Masterʼs thesis, Faculty of Applied Arts, Helwan University. 9- Abdul Qader. Omnia Yosri.(2012): "The Effectiveness of 3D Simulation Program for Improvement of Productivity of the Egyptian Ready-Made Garment Factories", unpublished Masterʼs thesis, Faculty of Home Economics, Helwan University. 10- Abdo. Nashwa Mohamed El sayed, Aborady. Asmaa Glal Abd Elaziz .(2020). "Using CLO 3D program to evaluate the basic Flat Pattern for girls in adolescence, " Journal of Architecture, Arts, and Human Sciences, Issue (22). 11- Faraj. Fida Khader Khaled, Dabbas. Rania Mustafa Kamel Abdel Aal, Salem. Shadia Salah Hassan Metwally.(2017). "A Comparative study on Manual and Computerized 3D programs inn Drawing Flat Pattern For Female Trousers", International Design Journal, Volume (7), Issue (4). 12- Metwally. Shadia Salah Hassan, Ibrahim. Abeer Ibrahim Abdel Hamid. (2018). "A Comparison Between the Manual Method and (Optitex) program in the preparation of Draping Patterns on the Dress Form" , Journal of Specialized Education Research, Issue (52). 13- Mohamed. Shaimaa Moustafa Ahmed. (2014): "Virtual Reality as a Novel Technique for Developing Garment Sample in Apparel Industry", doctoral thesis, Faculty of Applied Arts, Helwan University. 14- Mohamed. Shaimaa Moustafa Ahmed.(2010): "Improving engineering efficiency in ready-made garment factories using information systems" , Master ʼs thesis, Faculty of Applied Arts, Helwan University. 15- Mohamed. farid Mohamed .(2005): "Applied Program to Produce the sample by Using CAD system in Ready- made Garment Industry", unpublished Masterʼs thesis, Faculty of Home Economics, Helwan University. 16- Mosad. Emad Zayed Bekheet .(2021). "The effect of a proposed operating method for the Gerber system to reduce operations time in Apparel industry", Egyptian Journal of Home Economics, Volume (37), Issue (2). 17- Yassin. Mohamed Hossam Abd El-monem .(2020): "The impact of 3D simulation system to improve productivity of sampling department inn ready- made garment", Masterʼs thesis, Faculty of Home Economics, Helwan University 18- Istook and L. Cynthia).2000).Rapid Prototype in the textile and apparel industry,Journal of Textile and Apparel Technology and Management, ITATM,USA September. 19- Jaeil Lee and Camille steen).2010(,Technical source book for designers, Fairchild book`s, Lnc.a dinsion of conde nast publications. 20- J.Fan and L. Hunte).2009).Engineering apparel, fabrics and garment, First published, Wood head publishing Limited. 21- Sarkar,P. Park,H., Cho,Y.,Tsuchiyak., Takatera, M., Inui, S., & Shimizu, Y).2010(.Computerized Pattern Making Focus on fitting to 3D human body shapes, International Journal of Clothing and Technology, 22(1). 22- Shaimaa M. Ahmed).2023(,]Adjusting the garment Virtual Prototype by taking Advantages of Gerber Program and Clo 3d Program[, International Journal of Textile and Fashion Technology(IJTFT).)In Arabic) 23- Taylor-pm).1994).Tool box of garment handling techniques. 24- http://WWW.Starimes.com/
View on SCiNiTO
Top