القياسات الانقروبومترية البشرية لليد وتصميم المنتجات

1. Albin, T. & Molenbroek, J. (2023). Introduction to the Special Issue, Anthropometry in Design. Ergonomics in Design. [Source]
2. Ashdown, S. P. (2020). Full body 3-D scanners. Anthropometry in Anthropometry, Apparel Sizing and Design (Second Edition), The Textile Institute Book Series, Pages 145-168
3. Babapour Chafi, M., Hultberg, A., & Bozic Yams, N. (2021). Post-pandemic office work: Perceived challenges and opportunities for a sustainable work environment. Sustainability. [Source]
4. Bartol, K., Bojanić, D., Petković, T., & Pribanić, T. (2021). A review of body measurement using 3D scanning. Ieee Access. [Source]
5. Bridger, Robert, (2018), Introduction to human factors and ergonomics, Fourth edition, Boca Raton,  Taylor & Francis, CRC Press.
6. Bruno, F., Barbieri, L., & Muzzupappa, M. (2020). A Mixed Reality system for the ergonomic assessment of industrial workstations. International Journal on Interactive Design and Manufacturing (IJIDeM), 14(3), 805-812. [ Source]
7. Cappa, F., Oriani, R., Peruffo, E., & McCarthy, I. (2021). Big data for creating and capturing value in the digitalized environment: unpacking the effects of volume, variety, and veracity on firm performance. Journal of Product Innovation Management, 38(1), 49-67. [ Source]
8. Capsi-Morales, P., Grioli, G., Piazza, C., Bicchi, A., & Catalano, M. G. (2020). Exploring the role of palm concavity and adaptability in soft synergistic robotic hands. IEEE Robotics and Automation Letters, 5(3), 4703-4710. [Source]
9. Choong, S.W.J.; Ng, P.K.; Yeo, B.C.; Draghici, A.; Gaureanu, A.; Ng, Y.J.; Wong, G.M.H.; Selvan, H.K.T. A Preliminary Study on Ergonomic Contribution to the Engineering Design Approach of a Wheel Loader Control Lever System. Sustainability 2022, 14, 122. https://doi.org/10.3390/su14010122
10. 10.  Chow, L. (2022). Finite element model for design of pressure therapy gloves for hypertrophic scars. [Source]

11. Cotes, J. E. (2020). Body Size and Anthropometric Measurements, Wiley Research, https://doi.org/10.1002/9781118597309.ch4

12. Cross, N. (2021). Engineering design methods: strategies for product design. [Source]

13. da Silva, A. G., Winkler, I., Gomes, M. M., & Pinto, U. D. M. (2020,). Ergonomic analysis supported by virtual reality: a systematic literature review. In 2020 22nd Symposium on Virtual and Augmented Reality (SVR) (pp. 463-468). IEEE. [Source]

14. Daruis, D. D. I., Khamis, N. K., & Deros, B. M. (2021). The hand–the basic anthropometry. Human Factors and Ergonomics Journal (HFEJ), Vol. 6(2): 49 – 55

15. Dimitrijevic, M., Lalovic, D., & Milovanov, D. (2021). Correlation of different anthropometric methods and bioelectric impedance in assessing body fat percentage of professional male athletes. Experimental and Applied Biomedical Research (EABR). [Source]

16. Dunai, L., Novak, M., & García Espert, C. (2020). Human hand anatomy-based prosthetic hand. Sensors. [Source]

17. Ferrari, R., Lachs, L., Pygas, D. R., Humanes, A., Sommer, B., Figueira, W. F., ... & Guest, J. R. (2021). Photogrammetry as a tool to improve ecosystem restoration. Trends in Ecology & Evolution, 36(12), 1093-1101. [ Source]

18. Fulton, P. V., Löhlein, S., Paredes-Acuña, N., Berberich, N., & Cheng, G. (2021, December). Wrist exoskeleton design for pronation and supination using mirrored movement control. In 2021 20th International Conference on Advanced Robotics (ICAR) (pp. 575-580). [Source]

1. 19.  Gupta, Deepti. (2020). New directions in the field of anthropometry, sizing and clothing fit, in Anthropometry, Apparel Sizing and Design (Second Edition), The Textile Institute Book Series, Pages 3-27

20. Hajaghazadeh, M., Taghizadeh, M., Mohebbi, I., & Khalkhali, H. (2022). Hand anthropometric dimensions and strengths in workers: A comparison of three occupations. Human Factors and Ergonomics in Manufacturing & Service Industries, 32(5), 373-388. [Source]

21. John D. Lee, Christopher D. Wickens, Yili Liu, Linda Ng Boyle (2017), Designing for People: An Introduction to Human Factors Engineering, 3rd Edition, Create Space Charleston, SC, ISBN-10: 1539808009.

22. Kaewdok, T., Sirisawasd, S., Norkaew, S., & Taptagaporn, S. (2020). Application of anthropometric data for elderly-friendly home and facility design in Thailand. International Journal of Industrial Ergonomics, 80, 103037. [ Source]

23. Kamariotou, V., Kamariotou, M., & Kitsios, F. (2021). Strategic planning for virtual exhibitions and visitors’ experience: A multidisciplinary approach for museums in the digital age. Digital Applications in Archaeology and Cultural Heritage, 21, e00183. [Source]

24. Kashef, S. R., Amini, S., & Akbarzadeh, A. (2020). Robotic hand: A review on linkage-driven finger mechanisms of prosthetic hands and evaluation of the performance criteria. Mechanism and Machine Theory. [Source]

25. Kelkanlo, R., Kouhnavard, B., & Falaki, S. H. (2020). Investigating Hand Anthropometric Dimensions-A Case Study on Office Personnel and Car Mechanics. International Journal of Occupational Hygiene, 12(3), 180-191.  [Source]

26. Kivell, T. L., Ostrofsky, K. R., Richmond, B. G., & Drapeau, M. S. (2020). Metacarpals and manual phalanges. Hominin Postcranial Remains from Sterkfontein, South Africa, 1936-1995, 106. [Source]

27. Kuo, C. C., Kung, H. Y., Wu, H. C., & Wang, M. J. (2023). Developing a hand sizing system for a hand exoskeleton device based on the Kansei Engineering method. Journal of Ambient Intelligence and Humanized Computing, 14(11), 14395-14407. [Source]

28. Laffranchi, M., Boccardo, N., Traverso, S., Lombardi, L., Canepa, M., Lince, A., ... & De Michieli, L. (2020). The Hannes hand prosthesis replicates the key biological properties of the human hand. Science robotics, 5(46), eabb0467. [Source]

29. Lo, C. K., Chen, C. H., & Zhong, R. Y. (2021). A review of digital twin in product design and development. Advanced Engineering Informatics. [Source]

30. Ma, L. & Niu, J. (2021). Three‐Dimensional (3D) Anthropometry and its Applications In Product Design. Handbook of human factors and ergonomics. [Source]

31. Malhotra, S., Yadav, J., & Chopra, A. (2023, May). Precision Anthropometric Insights for User-Centric Mobile Phone Design. In International Conference on Business and Technology (pp. 192-203). Cham: Springer Nature Switzerland.

32. Mandahawi, Nabeel, Sheik Imrhan, Salman Al-Shobaki, B.Sarder (2008) Hand anthropometry survey for the Jordanian population, International Journal of  Industrial Ergonomics, Vol 38(11), Pages 966-976, https://doi.org/10.1016/j.ergon.2008.01.010

33. Martin, P. (2023). The Seven Measures of the World. [Source]

34.Matthew S. Rogers, Alan B. Barr, Boontariga Kasemsontitum & David M. Rempel (2008). A three-dimensional anthropometric solid model of the hand based on landmark measurements, Ergonomics Vol. 51, No. 4,  511–526, DOI:10.1080/00140130701710994

35. Mocini, E., Cammarota, C., Frigerio, F., Muzzioli, L., Piciocchi, C., Lacalaprice, D., ... & Pinto, A. (2023). Digital anthropometry: A systematic review on precision, reliability and accuracy of most popular existing technologies. Nutrients, 15(2), 302. [Source]

36. Mohd Javaid, Abid Haleem, Ravi Pratap Singh,Rajiv Suman (2021), Industrial perspectives of 3D scanning: Features, roles and it's analytical application, Sensors International, Sensors International, Volume 2, 2021,100114, https://doi.org/10.1016/j.sintl.2021.100114

37. Morgan, J. & Liker, J. K. (2020). The Toyota product development system: integrating people, process, and technology. [Source]

38. Moustafa A. W. (2016) "Anthropometry of the Egyptian female hand with relevance to control design", 4th International Conference of the Faculty of Applied Arts, Helwan University, Cairo (28-29 February, 2016)

39. Nickerson, B. S., McLester, C. N., McLester, J. R., & Kliszczewicz, B. M. (2020). Relative accuracy of anthropometric-based body fat equations in males and females with varying BMI classifications. Clinical nutrition ESPEN, 35, 136-140. [Source]

40. Padilla, C. J., Ferreyro, F. A., & Arnold, W. D. (2021). Anthropometry as a readily accessible health assessment of older adults. Experimental Gerontology. [Source]

41. Pal, A., Patel, T., & Khro, K. (2024). A comparative study of the effectiveness of photogrammetric versus manual anthropometric measurements. Work. [Source]

42. Parvez, M. S., Shahriar, M. M., Tasnim, N., & Hoque, A. S. M. (2022). An anthropometry survey of Bangladeshi university students. Journal of Industrial and Production Engineering, 39(2), 89-108. [Source]

43. Patrick, V. M. & Hollenbeck, C. R. (2021). Designing for all: Consumer response to inclusive design. Journal of consumer psychology. [Source]

44. Pepe, M. & Domenica, C. (2020). Techniques, tools, platforms and algorithms in close range photogrammetry in building 3D model and 2D representation of objects and complex architectures. Computer-Aided Design and Applications. [Source]

45. Reiman, A., Kaivo-oja, J., Parviainen, E., Takala, E. P., & Lauraeus, T. (2021). Human factors and ergonomics in manufacturing in the industry 4.0 context–A scoping review. Technology in Society, 65, 101572. [Source]

46. Rincón-Becerra, O. & García-Acosta, G. (2020). Estimation of anthropometric hand measurements using the ratio scaling method for the design of sewn gloves. Dyna. [Source]

47. Rodrigues, P. B., Xiao, Y., Fukumura, Y. E., Awada, M., Aryal, A., Becerik-Gerber, B., ... & Roll, S. C. (2022). Ergonomic assessment of office worker postures using 3D automated joint angle assessment. Advanced Engineering Informatics, 52, 101596. [Source]

48. Rostamzadeh, S., Saremi, M., Vosoughi, S., Bradtmiller, B., Janani, L., Farshad, A. A., & Taheri, F. (2021). Analysis of hand-forearm anthropometric components in assessing handgrip and pinch strengths of school-aged children and adolescents: a partial least squares (PLS) approach. BMC pediatrics, 21, 1-12. [Source]

49. Rosu, D., Enache, I. S., Muntean, R. I., & Stefanica, V. (2024). Effects of Kin Ball Initiation: Pre-and Post-Pandemic Impact on Palmar Muscle Strength, Endurance, and Coordination in Non-Athlete Participants. Sports. [Source]

50. Rumbo-Rodríguez, L., Sánchez-SanSegundo, M., Ferrer-Cascales, R., García-D’Urso, N., Hurtado-Sánchez, J. A., & Zaragoza-Martí, A. (2021). Comparison of body scanner and manual anthropometric measurements of body shape: a systematic review. International journal of environmental research and public health, 18(12), 6213. [Source]

51. Saaludin, N., Saad, A., & Mason, C. (2022). Reliability and ethical issues in conducting anthropometric research using 3D scanner technology. In Digital Manufacturing Technology for Sustainable Anthropometric Apparel (pp. 71-95). Woodhead Publishing. [Source]

52. Seifert, E. A. (2020). Comparison and Validation of Traditional and Three-Dimensional Anthropometric Methods for Measuring the Hand through Reliability, Precision, and Visual Analysis. [Source]

53. Shahriar, M. M., Parvez, M. S., & Lutfi, M. (2020). A survey of hand anthropometry of Bangladeshi agricultural farm workers. International Journal of Industrial Ergonomics, 78, 102978. [Source]

54. Shan, D., Geng, J., Shu, M., & Fouhey, D. F. (2020). Understanding human hands in contact at internet scale. In Proceedings of the IEEE/CVF conference on computer vision and pattern recognition (pp. 9869-9878). [Source]

55. Shan, G. (2023). … of equipment design and human physical ability: Leveraging biomechanics, ergonomics/anthropometry, and wearable technology for enhancing human, Advanced Design Research. [Source]

56. Sheik N. Imrhana; M. D. Sarderb; Nabeel Mandahawic (2009).Hand anthropometry in Bangladeshis living in America and comparisons with other populations, Ergonomics Volume 52(8) pp987-998, DOI:10.1080/00140130902792478

57. Smith, B., McCarthy, C., Dechenaud, M. E., Wong, M. C., Shepherd, J., & Heymsfield, S. B. (2022). Anthropometric evaluation of a 3D scanning mobile application. Obesity, 30(6), 1181-1188. [Source]

58. Stark, E., Haffner, O., & Kučera, E. (2022). Low-cost method for 3D body measurement based on photogrammetry using smartphone. Electronics. [Source]

59. Strandholt, P. L., Dogaru, O. A., Nilsson, N. C., Nordahl, R., & Serafin, S. (2020, April). Knock on wood: Combining redirected touching and physical props for tool-based interaction in virtual reality. In Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems (pp. 1-13). [Source]

60. Sutcliffe, A. (2022). Designing for user engagement: Aesthetic and attractive user interfaces. [Source]

61. Taha, Z., Aris, M. A., Ahmad, Z., Hassan, M. H. A., & Sahim, N. N. (2013). A Low Cost 3D Foot Scanner for Custom-Made Sports Shoes. Applied Mechanics and Materials, 440, 369–372.

62. Taifa, I. W., Desai, D. A., & Bulsara, N. M. (2021). The development of an ergonomically designed product through an integrated product team approach. International Journal of Occupational Safety and Ergonomics. [Source]

63. Thanas M. Greiner (1991) Hand Anthropometry of U.S. Army Personnel, Anthropology Branch, Behavioral Sciences Division, Soldier Science Directorate, U.S. Army Natick Research, Development & Engineering Center, Natick, REPORT NUMBER MA 01760-5020

64. Thelwell, M., Chiu, C. Y., Bullas, A., Hart, J., Wheat, J., & Choppin, S. (2020). How shape-based anthropometry can complement traditional anthropometric techniques: a cross-sectional study. Scientific Reports, 10(1), 12125. [Source]

65. Thomas M. Greiner (1991), Hand Anthropometry OF U.S. Army Personnel, Anthropology Branch, Behavioral Sciences Division Soldier Science Directorate, U.S. Army Natick Research, Development & Engineering Center, Natick, Report Number MA 01760-5020

66. Ulijaszek, S. (2020). Reporting statistics on. The Anthropological Demography of Health. [Source]

67. Uriel, J., Ruescas, A., Iranzo, S., Ballester, A., Parrilla, E., Remón, A., & Alemany, S. (2022). A methodology to obtain anthropometric measurements from 4D scans. In Proceedings of the 7th International Digital Human Modeling Symposium (Vol. 7, No. 1). University of Iowa. [Source]

1. Vijayan, V., Connolly, J. P., Condell, J., McKelvey, N., & Gardiner, P. (2021). Review of wearable devices and data collection considerations for connected health. Sensors, 21(16), 5589. [Source]
2. Wang, B., Zheng, P., Yin, Y., Shih, A., & Wang, L. (2022). Toward human-centric smart manufacturing: A human-cyber-physical systems (HCPS) perspective. Journal of Manufacturing Systems, 63, 471-490. [Source]
3. Wang, L., Lee, T. J., Bavendiek, J., & Eckstein, L. (2021). A data-driven approach towards the full anthropometric measurements prediction via Generalized Regression Neural Networks. Applied Soft Computing. [Source]
4. Wang, Z. (2020). Review of real-time three-dimensional shape measurement techniques. Measurement. [Source]
5. Wen, J., Wang, J., Xu, Q., Wei, Y., Zhang, L., Ou, J., ... & Tong, M. (2020). Hand anthropometry and its relation to grip/pinch strength in children aged 5 to 13 years. Journal of International Medical Research, 48(12), 0300060520970768. [Source]
6. Yang, Y., Zhou, H., Song, Y., & Vink, P. (2021). Identify dominant dimensions of 3D hand shapes using statistical shape model and deep neural network. Applied Ergonomics. [source]