Anber, M., Shawky, O. (2024). Achieving Indoor Thermal Comfort Using AI-Controlled Shading in Hot Arid Climates in Office Buildings. International Design Journal, 14(6), 205-213. doi: 10.21608/idj.2024.305830.1172
Maha Fawzy Anber; Omnia Shawky. "Achieving Indoor Thermal Comfort Using AI-Controlled Shading in Hot Arid Climates in Office Buildings". International Design Journal, 14, 6, 2024, 205-213. doi: 10.21608/idj.2024.305830.1172
Anber, M., Shawky, O. (2024). 'Achieving Indoor Thermal Comfort Using AI-Controlled Shading in Hot Arid Climates in Office Buildings', International Design Journal, 14(6), pp. 205-213. doi: 10.21608/idj.2024.305830.1172
Anber, M., Shawky, O. Achieving Indoor Thermal Comfort Using AI-Controlled Shading in Hot Arid Climates in Office Buildings. International Design Journal, 2024; 14(6): 205-213. doi: 10.21608/idj.2024.305830.1172
Achieving Indoor Thermal Comfort Using AI-Controlled Shading in Hot Arid Climates in Office Buildings
2Department of Architectural Engineering, The Higher Institute of Engineering
Abstract
Hot arid and desert regions like the MENA, Middle East and North Africa, regions are characterized by high levels of solar radiation and high temperatures. Incoming solar radiation on buildings affect the thermal ad visual comfort of building occupants. Large glazed buildings allow solar radiation to get inside the building enhancing visual comfort, but also it affects thermal comfort and causes glare. The building envelope is the main mediator between the outdoor environment and solar radiation and the indoor of buildings in terms of visual and thermal comfort. Climate change resulted in excessive solar radiation which affects thermal and visual comfort in buildings. While solar radiation is considered a potential as renewable energy source, it is now a great challenge to be controlled inside buildings. Daylight can be optimized by different strategies in order to achieve thermal and visual comfort in buildings. This paper presents a study of how to achieve thermal comfort in hot arid climates using an Artificial Intelligence AI-controlled shading system. The proposed AI- controlled shading is applied to an office building in Egypt to check the reduction in energy consumption and enhancement in thermal comfort. This study concluded that the proposed AI- controlled shading system dropped the indoor temperature by 4°C and reduced energy consumption by 25% while thermal comfort complaints decreased by 77.78% and glare difficulties by 76%.
Gianpiero Evola, Federica Gullo, Luigi Marletta “The role of shading devices to improve thermal and visual comfort in existing glazed buildings”, Energy Procedia, Volume 134, 2017, Pages 346-355, ISSN 1876-6102,https://doi.org/10.1016/j.egypro.2017.09.543.
Awad, Jihad & Abd-Rabo, Lamia. (2020). Daylight and Energy Performance Optimization in Hot - Arid Regions: application and adaptation guide for designers in the UAE. Procedia Manufacturing. 44. 237-244. 10.1016/j.promfg.2020.02.227.
Anber, M. (2024) The Efficiency of Using Mineral Insulating Solutions in Buildings in Egypt, International Design Journal, Volume 14_Issue 1_Pages 371-379. DOI: 10.21608/idj.2023.249201.1099
K.A. Cort, J.A. McIntosh, G.P. Sullivan, T.A. Ashley, C.E. Metzger, N. Fernandez, (2018) Testing the Performance and Dynamic Control of Energy-Efficient Cellular Shades in the PNNL Lab Homes [Online], Office of Scientific and Technical Information (OSTI), https://doi.org/10.2172/1477792.
C. Shum & L. Zhong (2023) A review of smart solar shading systems and their applications: Opportunities in cold climate zones, Journal of Building Engineering 64 (2023) 105583, ELSEVIER.
Alwetaishi M., Al-Khatri H., Benjeddou O., Shamseldin A., Alsehli M., Alghamdi S., Shrahily R., (2021). An investigation of shading devices in a hot region: A case study in a school building, Ain Shams Engineering Journal, Volume 12, Issue 3, pp. 3229-3239, ISSN 2090-4479, https://doi.org/10.1016/j.asej.2021.02.008.
Dev, G.; Saifudeen, A.; Sathish, A. (2021) Facade control systems for optimal daylighting: A case of Kerala. IOP Conf. Ser. Earth Environ. Sci. 2021, 850, 012014.
Joshi, Neha & Patki, Pradnya. (2022). Relationship of shading devices and its effects on daylight in Commercial buildings in Pune. IOP Conference Series: Earth and Environmental Science. 1084. 012079. 10.1088/1755-1315/1084/1/012079.
A Nocente et al ( 2021) Comparative field tests of an electrochromic shading device - thermal and visual comfort . J. Phys.: Conf. Ser. 2069 012222. doi:10.1088/1742-6596/2069/1/012222
Hoof, Joost & Mazej, Mitja & Hensen, Jan. (2010). Thermal comfort: Research and practice. Frontiers in Bioscience. 15. 765-788. 10.2741/3645.
Asim Ahmad, Om Prakash, Anil Kumar, S.M. Mozammil Hasnain, Puneet Verma, Ali Zare, Gaurav Dwivedi, Anukul Pandey, “Dynamic analysis of daylight factor, thermal comfort and energy performance under clear sky conditions for building: An experimental validation”, Materials Science for Energy Technologies,Volume 5,2022,Pages 52-65,ISSN 2589-2991, https://doi.org/10.1016/j.mset.2021.11.003.
Ruck, N. & Aschehoug, Øyvind & Aydinli, Samil & Christoffersen, Jens & Edmonds, Ian & Jakobiak, Roman & Kischkoweit-Lopin, M. & Klinger, M. & Lee, Eleanor & Courret, Gilles & Michel, L. & Scartezzini, Jean-Louis & Selkowitz, Stephen. (2000). Daylight in Buildings - A source book on daylighting systems and components.
Selkowitz, Stephen & Aschehoug, Øyvind & Lee, Eleanor (2003). Advanced Interactive Facades - Critical Elements for Future GreenBuildings?. the annual USGBC International Conference and Expo, November 2003. LBNL-53876.
A. W. &. Fatma Fathy, "A parametric approach for achieving optimum daylighting performance through solar screens in desert climates," Journal of Building Engineering, vol. 3, pp. 155-170, 2015.
W. P. &. A. M. A. Jianxin Hu, "Using diva for assessing climate-based leed daylight credit," in The 43rd Annual National Solar Conference, 2014.
Gugliermetti, F. & Bisegna, Fabio. (2005). Static and dynamic daylight control systems: Shading devices and electrochromic windows. IBPSA 2005 - International Building Performance Simulation Association 2005.
Galal, Omar & Sailor, David & Mahmoud, Hatem. (2020). The impact of urban form on outdoor thermal comfort in hot arid environments during daylight hours, case study: New Aswan. Building and Environment. 184. 107222. 10.1016/j.buildenv.2020.107222.
V. Costanzo, R. Yao, E. Essah, L. Shao, M. Shahrestani, A.C. Oliveira, M. Araz, A. Hepbasli, E. Biyik, “A method of strategic evaluation of energy performance of Building Integrated Photovoltaic in the urban context”, Journal of Cleaner Production, Volume 184,2018, Pages 82-91, ISSN 0959-6526, https://doi.org/10.1016/j.jclepro.2018.02.139.
Maria Konstantoglou, Aris Tsangrassoulis, (2016) Dynamic operation of daylighting and shading systems: a literature review, Renew. Sustain. Energy Rev. 60, 268–283.
Luo, Z., Sun, C., Dong, Q., & Yu, J. (2021). An innovative shading controller for blinds in an open-plan office using machine learning. Building and Environment, 189, 107529. doi:10.1016/j.buildenv.2020.10752