Attia, A., El belbesi, M. (2024). Innovating New Weaving Structural Components to Create Woven Jacquard Sports Footwear Fabrics. International Design Journal, 14(1), 313-325. doi: 10.21608/idj.2024.329316
Ahmed Attia; Mayada Magdy Mohamed Khalil El belbesi. "Innovating New Weaving Structural Components to Create Woven Jacquard Sports Footwear Fabrics". International Design Journal, 14, 1, 2024, 313-325. doi: 10.21608/idj.2024.329316
Attia, A., El belbesi, M. (2024). 'Innovating New Weaving Structural Components to Create Woven Jacquard Sports Footwear Fabrics', International Design Journal, 14(1), pp. 313-325. doi: 10.21608/idj.2024.329316
Attia, A., El belbesi, M. Innovating New Weaving Structural Components to Create Woven Jacquard Sports Footwear Fabrics. International Design Journal, 2024; 14(1): 313-325. doi: 10.21608/idj.2024.329316
Innovating New Weaving Structural Components to Create Woven Jacquard Sports Footwear Fabrics
1Spinning and Weaving Department, Damietta University, Faculty of Applied Arts, New Damietta City
2Lecturer in the Department of Spinning and weaving- Faculty of Applied Arts- Damietta University
Abstract
This study aims to Produce jacquard woven fabrics using innovative textile structures components adequate for woven sports footwear fabrics that compete with similar ones produced from knitted fabrics in terms of cost and physical and mechanical properties such as comfort and durability of the sports footwear. Hence, this study represents (4) samples produced from (Polyester filament, chenille P.E., chenille P.E. (micro flat), and polyester spun by using double weave wadding structure techniques depending on some different structural components such as weft density/inch, end density/inch and their sequences. The results of statistical analysis for correlation coefficients show that the different structural components of the woven jacquard sports footwear fabrics have a strong correlation that affects the functional performance properties such as tensile strength, elongation, pilling, friction resistance, and air permeability in addition to reducing the production cost, which reflects positively on the annual expenditure of foreign currency required to meet the market's need for sports footwear fabrics
1-Ahmad, F., Akhtar, K.S., Mushtaq, B., Anam, W., Rasheed, A., et al. (2023). " Recent Developments in Materials and Manufacturing Techniques Used for Sports Textiles" International Journal of Polymer Science,1-20.
2-Ahmed, F. M., Reda, M. M., Abd El-Aziz, H. A., and Othman, H. A. (2022). " Overview of Different Fabric Structures, Journal of Textiles" Coloration and Polymer Science Vol. 19, No. 2, 291-306.
3-Akter, S., and Chowdhury, S. (2018). " The Construction Principle of Double Cloth and Its Properties" vol 4 is 4, trends in textile engineering &fashion technology.
4-Au, E. Y. L., and Goonetilleke, R. S. (2007). "A qualitative study on the comfort and fit of ladies’ dress shoes" Applied Ergonomics, 38(6), 687-696.
5-Blage, M., Marmarali, A., and Mihai, A. (2011)."Functional knitted fabrics for sports footwear linings," Tekstil ve Konfeksiyon, 21(1):30-35.
6-Bullon J. J., González A., Encinas A. H., and Queiruga-Dios, A. (2017). " Manufacturing processes in the textile industry", Expert Systems for fabric production, 6: 15.
7-Chan, L. K. (2013), "The anatomy of the human foot " in A. Luximon (ed) Handbook of sports footwear design and manufacture, Woodhead Publishing Limited, New Delhi – India, 318–268.
9-Mathur, K. and Seyam, A. F. (2011). " Color and Weave Relationship in Woven Fabrics" Rijeka, Croatia: InTech, 141-163.
10-Mia, M. A. S., Nur-E-Alam, M., Murad, A. B. M. W., Ahmad, F., Uddin, M. K. (2017) "Waste management & quality assessment of sports footwear manufacturing industry in Bangladesh: an innovative approach" Int J Eng Manag Res (IJEMR).; 7: 402-7
11-Murley, G. S., and Landorf, L. (2012). "Effects of sports footwear on muscle function " In R. S. Goonetilleke (Ed.), The science of sports footwear, Boca Raton, FL: CRC Press, 489-512.
12-Nam, C. )2019(. "Sustainable shoe design and evaluation using kinematic and kinetic analysis " Ph.D., Iowa State University. Ames, Iowa.
13-Nebo, M. (2005). " Functional sports footwear". In Textiles in Sport, Woodhead Publishing.; 70-85.
14-Ning, K., Yick, K.L., Yu, A., and Yip, J. (2022). " Effects of textile-fabricated insole on foot skin temperature and humidity for enhancing sports footwear thermal comfort" Applied Ergonomics, Elsevier Ltd, 104(1).
15-Ozdemir, M., Cascini, G., and Verlinden, J. (2020). "A mass personalization framework for knitted sports footwear" 9th Conference on Mass Customization and Personalization – Community of Europe, Novi sad, Serbia, 175-183.
16-Özdil, N., and Anand, S., (2014). " Recent Developments in Textile Materials and Products Used for Active Wear and Sportswear" Electronic Journal of Vehicle Technologies.; 8(3) , 68-83.
17-Rajan, T. P., Souza, L. D., Ramakrishnan, G., and Zakriya, G. M. (2016), - " Comfort properties offunctional warp-knittedpolyester spacer fabricsfor shoe insoleapplications "Journal of Industrial Textiles, Vol. 45(6) 1239–1251.
18-Rowe, T. (2009). " Interior Textiles: Design and Developments ",1st Edition, Woodhead Publishing Limited, India, PP.18,39,91,92.
19-Roy, R., Udhayakumar, G., and Bhardwaj, P. (2023) " The Role of Textile Materials in Sports footwear: A Comprehensive Review" Advance Research in Textile Engineering, 8(1), 1-8.
20-Salah, A., and Eletreby, A. (2021). " The Production of kilim fabrics in mass production on shuttle-less looms, and giving them the appearance of handcraft" Journal of Architecture, Arts and Humanistic Science, 6(2), 1881-1899.
21-Seyam, A. M. (2011). "Developments in Jacquard woven fabrics " in Specialist Yarn and Fabric Structures (Woodhead Publishing Series in Textiles). Sawston, UK: Woodhead Publishing, ch. 10, 223_263.
22-Shenton, J. (2014). "Woven fabric design," LaurenceKing Publishing Ltd. London.
23-Silva, R. M., Pinto, V.V., Freitas, F., and Ferreira, M.J. (2007), "Characterisation of barrier effects in sports footwear" in Duquesne S, Magniez C and Camino G (eds) Multifunctional Barriers for Flexible Structure Textiles, Leather and Paper, Berlin, Spinger-Verlag Heidelberg, 229–268.
24-Song, G. (2011). " Improving comfort in clothing ", Woodhead Publishing Limited, The Textile Institute and Woodhead Publishing.
25-Staikos, T., Heath, R., Haworth, B., and Rahimifard, S. (2006) " End-of-life management of shoes and the role of biodegradable materials" In Proceedings of 13th CIRP International Conference on Life Cycle Engineering, 497-502.
26-Tambunan, T. M., PriyonoS. A., and Hernawati, R. M. (2022). " The Effect of Knitted Structure on the Quality of Knit Fabric for Shoe Materials Using Stoll for Weft Knitting Machines "- 4th Indonesian Textile Conference, Vol. 4, 163-176.
27-Wang, F. (2013), "Textiles for protective, military sports footwear " in A. Luximon (ed) Handbook of sports footwear design and manufacture, Woodhead Publishing Limited, New Delhi – India, 318–320.
28-Watson, W., and Grosicki, Z. (1975). "Watson's Textile Design and Colour: Elementary Weaves and Figured Fabrics" (7th ed.). London: Newnes Butterworths.
29-Yick, K.L., and Tse, C.Y. (2013). " Textiles and other materials for orthopedic sports footwear insoles" In Handbook of sports footwear design and manufacture. Woodhead Publishing.; 341-371.
30-Yoo, s., and Barker, R. L. (2005). " Comfort Properties of Heat-Resistant Protective Workwear in Varying Conditions of Physical Activity and Environment ", Textile Res. J., Sage Publications, 75(7),523–530.
31-Zhiwen, L.u., Jiang, G., Cong, H., and Yang, X. (2016). " The Development of the Flat-Knitted Shaped Uppers Based on Ergonomics" AUTEX Research Journal, 16(2) , 67-74.