Abd-El-Aziz, M. (2023). A Review on Textile Products for Reinforcing Concrete Sandwich Panels. International Design Journal, 13(2), 169-177. doi: 10.21608/idj.2023.288315
Manar Yahia Ismail Abd-El-Aziz. "A Review on Textile Products for Reinforcing Concrete Sandwich Panels". International Design Journal, 13, 2, 2023, 169-177. doi: 10.21608/idj.2023.288315
Abd-El-Aziz, M. (2023). 'A Review on Textile Products for Reinforcing Concrete Sandwich Panels', International Design Journal, 13(2), pp. 169-177. doi: 10.21608/idj.2023.288315
Abd-El-Aziz, M. A Review on Textile Products for Reinforcing Concrete Sandwich Panels. International Design Journal, 2023; 13(2): 169-177. doi: 10.21608/idj.2023.288315
A Review on Textile Products for Reinforcing Concrete Sandwich Panels
Clothing and Knitting Industrial Research Department, Textile Research and Technology Institute, National Research Centre, 33-El-Behouth St., Dokki, Giza, P.O.12622,
Abstract
Concrete sandwich panels have gained considerable popularity in the construction industry. Based on their structural and thermal performance, sandwich panels have been employed in industrial, residential, and commercial structures. Two concrete outer layers are connected by connections that run through the interior insulating material, which is isolated from the exterior layers by an insulating stiff foam core to increase thermal effectiveness. There are numerous issues with the steel used for reinforcement including corrosion, high cost, heavy weight, increased thickness, and thermal bridges. Textile reinforcing concrete (TRC) is a solution for these issues, for that; researchers have attempted to replace steel with various textile goods to improve the quality of sandwich panels. Many researchers used textile’ grides for enhancing sandwich panels’ thermal isolation and reinforcing properties as nets or as a connector. This article reviews and observes methods of reinforcing concrete sandwich panels with TRC with different materials, constructions, behavior and application of textiles for investigating sandwich panels’ performance as well as textile reinforcing of concrete and discussing differences between these applications. It was found that TRC can be used for reinforcing concrete sandwich panels as core, as grid or as a connector, All these shapes of TRC effect on the performance of concrete sandwich panels positively.
1- Elgory, Z., & Ismail Abd El-Aziz, M., "Use of textile nets to reinforce concrete elements", Egyptian Journal of Chemistry, 65(13), (2022), doi: 10.21608/ejchem.2022.127989.5892
2- Portal, N. W., "Sustainability and Flexural Behaviour of Textile Reinforced Concrete", Department of Civil and Environmental Engineering, Chalmers University of Technology, Gothenburg, Sweden, (2013).
3- Brckner, A., "Textile reinforced concrete for strengthening in bending and shear", Materials And Structures, (2005), 741-748. https://doi.org/10.1617/14283
4- Brckner, A., "Textile reinforced concrete for strengthening in bending and shear", Materials And Structures, 741-748, (2005). https://doi.org/10.1617/14283
5- Krzyżak, A., Mazur, M., Gajewski, M., Drozd, K., Komorek, A., & Przybyłek, P., "Sandwich Structured Composites for Aeronautics: Methods of Manufacturing Affecting Some Mechanical Properties", International Journal Of Aerospace Engineering, 1-10, (2016). https://doi.org/10.1155/2016/7816912
6- Bunn, W., et al., "Composite and Thermally Efficient Precast Concrete Sandwich Panels Using CFRP Grid. Proc.", 6th International Conference on Advanced Composite Materials in Bridges and Structures, (2012).
7- Abbas, A., Adil, M., Ahmad, N., & Ahmad, I., "Behavior of reinforced concrete sandwiched panels (RCSPs) under blast load," Engineering Structures, 181, 476-490, (2019). https://doi.org/10.1016/j.engstruct.2018.12.051
9- Susanna Gerges, "Concrete sandwich element design in terms of Passive Housing recommendations and moisture safety", Master Thesis in Building Technology No 435, Building Science, Civil and Architectural Engineering, Kungliga, Tekniska Hِgskolan, (2015).
10- Williams Portal, N., Zandi, K., & Malaga, K., GFRP connectors in textile reinforced concrete sandwich elements. In Challenges in Design and Construction of an Innovative and Sustainable Built Environment (pp. 1-8). IABSE Congress Stockholm. Retrieved (23 June 2021).
11- Richard O′Hegarty, Roger West, Aidan Reilly, Oliver Kinnane., "Composite behaviour of fibre-reinforced concrete sandwich panels with FRP shear connectors", Engineering Structures,Volume 198, 109475, ISSN 0141-0296, (2019). https://doi.org/10.1016/j.engstruct.2019.109475.
12- O’Hegarty, R., & Kinnane, O., "Review of precast concrete sandwich panels and their innovations", Construction and Building Materials, 233, 117145, (2020). doi:10.1016/j.conbuildmat.2019.117145 10.1016
13- Klõšeiko, P., Piir, R., Jeltsov, M., & Kalamees, T., "Thermal bridge effect of vertical diagonal tie connectors in precast concrete sandwich panels: an experimental and computational study", E3S Web Of Conferences, 172, 08001, (2020). https://doi.org/10.1051/e3sconf/202017208001
14- S, P., J, A., Tamil Selvi, N., P, P., & Jaketia, A., "A Study on use of Reinforced Thermocol Panels as an Alternate Building Material", International Journal Of Research In Advent Technology, 4(3), 113-117, (March 2016).
15- Henin, E., Morcous, G., & Tadros, M., "Precast/Prestressed Concrete Sandwich Panels for Thermally Efficient Floor/Roof Applications", Practice Periodical On Structural Design And Construction, 19(3), 04014013, (August 2014). https://doi.org/10.1061/(asce)sc.1943-5576.0000213
16- Reilly, A., O'Hegarty, R., & Kinnane, O., "Preliminary Development of Thin Precast Concrete Sandwich Panels", Proceedings, 2(15), 1152, (October 2018). https://doi.org/10.3390/proceedings2151152
17- Hwang, S., Kim, J., Lee, S., & Kwun, H., "Prediction of sound reduction index of double sandwich panel", Applied Acoustics, 93, 44-50, (2015). https://doi.org/10.1016/j.apacoust.2015.01.017
18- Galgano, A., Di Blasi, C., & Milella, E., "Sensitivity analysis of a predictive model for the fire behaviour of a sandwich panel", Polymer Degradation And Stability, 95(12), 2430-2444, (2010). https://doi.org/10.1016/j.polymdegradstab.2010.08.012
19- Haider A. A. Al-Katib, H. H. T., "Behavior of Poly propylene Fibers Reinforced Concrete Modified with High Performance Cement", International Journal of Civil Engineering and Technology (IJCIET), 9(5), 1066-1074, (2018).
20- Ramujee, K., "Strength Properties of Polypropylene Fiber Reinforced Concrete", International Journal of Innovative Research in Science, Engineering and Technology, 2(8), 3409-3413, (2013).
21- Mohod, M. V., "Performance of Polypropylene Fibre Reinforced Concrete", Journal of Mechanical and Civil Engineering (IOSR-JMCE), 12(1 Ver. I), 28-36, (2015).
22- O.B. Ozger, F. G., "Effect of nylon fibres on mechanical and thermal properties of hardened concrete for energy storage systems", Materials and Design, 51, 989-997, (2013). doi:10.1016/2013.04.085
23- Altoubat S, Y. A., "Shear behaviour of macro-synthetic fibre-reinforced concrete beams without stirrups", Aci Materials Journal, 106(4), 381-389, (2009).
24- Nili, M., & Afroughsabet, V., "The effects of silica fume and polypropylene fibres on the impact resistance and mechanical properties of concrete", Construction and Building Materials, 24(6), 927-933, (2010). doi:10.1016/j.conbuildmat.2009.11.025
25- Yao, W., & Zhong, W., "Effect of polypropylene fibres on the long-term tensile strength of concrete", Journal of Wuhan University of Technology-Mater. Sci. Ed, 22(1), 52-55, (2007). doi:10.1007/s11595-005-1052-z
26- Halvaei, M., Jamshidi, M., & Latifi, M., "Strength properties of fine aggregate concretes reinforced by polyamide fibers", Journal of Industrial Textiles, 46(3), 684-697, (2016). doi:10.1177/1528083715591591
27- Pakravan, H. R., Jamshidi, M., & Latifi, M., "Investigation on polymeric fibers as reinforcement in cementitious composites Flexural performance", Journal of Industrial Textile, 42, 3-18, (2011). doi:10.1177/1528083711421358
28- Song, P., Hwang, S., & Sheu, B. C., "Strength properties of nylon- and polypropylene-fiber-reinforced concretes", Cement and Concrete Research, 35(8), 1546-1550, (2005). doi:10.1016/j.cemconres.2004.06.033
29- Manolis:, G. D., Gareis, P. J., Tsonos, A. D., & Neal, J. A. (1997). Dynamic Properties of Polypropylene Fiber-Reinforced Concrete Slabs. Cement and Concrete Composites, 19(4), 341-349.
30- Yap, S. P., Jumaat , M. Z., & Alengaram, U. J., "Enhancement of mechanical properties in polypropylene– and nylon–fibre", Materials and Design, 49, 1034-1041, (2013). doi:10.1016/j.matdes.2013.02.070
31- Kujawa , W., Olewnik-Kruszkowska, E., & Nowaczyk, J., "Concrete Strengthening by Introducing Polymer-Based Additives into the Cement Matrix—A Mini Review", Materials, 14(6071), (2021).
32- Sivakumar, A., & Santhanam, M., "َA quantitative study on the plastic shrinkage cracking in high strength hybrid fibre reinforced concrete”, Cement and Concrete Composites, 29(7), 575-581, (August 2007). doi:10.1016/j.cemconcomp.2007.03.005
33- CEB/FIP Manual of design and technology. Great Britain: Lightweight Aggregate Concrete. 1st Publ.; 1977.
34- Alengaram, U. J., Jumaat, M. Z., & Mahmud, H., "Influence of Sand Content on Mechanical Properties of Palm Kernel Shell Concrete", International conference on construction and building technology (pp. 251-262). Kuala Lumpur, Malaysia: ICCBT, (2008).
35- Abou-Taleb, E. M., & Abd El-Hady, R. A., "Woven Fiberglass Textiles for High Temperature Insulation (Fabric, Tape and Mesh ", 6th International Conference of Textile Research Division. 6, pp. 725-733. Cairo, Egypt: NRC, (2019).
36- Löber, P., & Holschemacher, K., "Structural Glass Fiber Reinforced Concrete for Slabs on Ground", World Journal of Engineering and Technology, 2, 48-54, (2014). doi:10.4236/wjet.2014.23B008
37- Schorn, H., "Fiber Reinforced Concretes for Load Bearing Structures", (German) Verlag Bau + Technik GmbH, Düsseldorf.
39- Abdalla, G., Elbadry, E., Aboraia, M., "Effect of Glass Fiber Stacking Sequence on the Notch Sensitivity of Glass Fiber Reinforced Epoxy Matrix Composites", Egyptian Journal of Chemistry, 63(8), 2977-2986, (2020). doi: 10.21608/ejchem.2020.19497.2186
40- Biswal, T., Priyadarsini, M., Dash, S., "Sustainable Biocomposite Its Manufaturing Processes and Applications", Egyptian Journal of Chemistry, 62(4), 751-766, (2019). doi:10.21608/ejchem.2018.4669.1440
41- Chira, A., Kumar, A., Vlach, T., Laiblová, L., & Hajek, P., "Textile-reinforced concrete facade panels with rigid foam core prisms", Journal Of Sandwich Structures & Materials, 18(2), 200-214, (2015). https://doi.org/10.1177/1099636215613488
42- Hegger, J., Will, N., & Voss, S., "Textile Reinforced Concrete Facades. In Concrete Structures : the Challenge of Creativity" Avignon, France, (Retrieved 23 June 2021).
43- Kim, J., & You, Y., "Composite Behavior of a Novel Insulated Concrete Sandwich Wall Panel Reinforced with GFRP Shear Grids: Effects of Insulation Types", Materials, 8(3), 899-913, (March 2015). https://doi.org/10.3390/ma8030899
Top