2- Manilal VB and Sony J. “Banana pseudostem characterization and its fiber property evaluation on physical and bio extraction.” J Nat Fibers 2011; 8(3): 149–160.
3- Gupta G and Bhatnagar RA., “Review on composition and properties of bagasse fibers.”, Int J Sci Eng Res 2015; 6(5): 143–148
4- Ray DP, Nayak LK, Ammayappan L, et al. Energy conservation drives for efficient extraction and utilization of banana fiber. Int J Emerg Technol Adv Eng 2013; 3(8): 296–310., [S. Balakrishnan et al., “Study on dyeing behavior of banana fiber with reactive dyes”, Journal of Engineered Fibers and Fabrics, 2019, Vol 14: Pp. 1–12.
5- Balakrishnan S. et al., “Study on dyeing behavior of banana fiber with reactive dyes”, Journal of Engineered Fibers and Fabrics, 2019, Vol 14: Pp. 1–12.
6- Subagyo A. and Chafidz, A. “Banana Pseudo-Stem Fiber: Preparation, Characteristics, and Applications”, 2018,
7- DOI: http://dx.doi.org/10.5772/intechopen.82204
8- Al Mamun M. et al. “Eco-Friendly Treatment of Green Banana Fibre in Compared to Chemical Treatment”, J. Mater. Environ. Sci., 2021, Vol 12, Issue 6, Pp 823-826.
9- Preethi P., M. G. Balakrishna, Physical and Chemical Properties of Banana Fibre Extracted from Commercial Banana Cultivars Grown In Tamilnadu, Agrotechnology, 11 (2013) 1-3. https://doi.org/10.4172/2168-9881.s11-008.
10- Islam, T. et al, “Dyeing Properties of Banana Fibre Dyed with Different Dyes”, IJEAT, Volume-9 Issue-1, 2019. DOI: 10.35940/ijeat. A1285.109119
11- Chinta SK and Vijaykumar S. Technical facts & figures of reactive dyes used in textiles. Int J Eng Manag Sci 2013; 4(3): 308–312.
12- Mukhopadhyay S., Fangueiro R., “Physical modification of natural fibers and thermoplastic films for composites- a review”, J. Thermoplast. Compos. Mater. 22 (2) (2009) 135–162)- (U. Gupta, et. Al, “Surface modification of banana fiber: A review”, Materials Today: Proceedings 43 (2021) 904-915.
https://doi.org/10.1016/j.matpr.2020.07.217
14- Dave H, Ledwani L, Nema SK. Nonthermal plasma: a promising green technology to improve environmental performance of textile industries. In: Shahidul- Islam, Butola BS, editors. The impact and prospects of green chemistry for textile technology. Amsterdam: Elsevier; 2019. P. 199–249
15- Naebe M. et. al, “Plasma-assisted antimicrobial finishing of textiles: A review”, https://doi.org/10.1016/j.eng.2021.01.011
16- Ratnapandian S, Wang L, Fergusson SM, Naebe M. Effect of atmospheric plasma treatment on pad-dyeing of natural dyes on wool. J Fiber Bioeng Inf 2011;4(3):267-76.
17- Haji A, Naebe M.,” Cleaner dyeing of textiles using plasma treatment and natural dyes: a review.”, J Cleaner Prod, 2020; Pp 265:121866.
18- Herbert T. Atmospheric-pressure cold plasma processing technology. In: Shishoo R, editor. Plasma technologies for textiles. Cambridge: Woodhead Publishing; 2007. p. 79–128.
19- K. Vinisha Rani, et Al., “Plasma treatment on cotton fabrics to enhance the adhesion of Reduced Graphene Oxide for electro-conductive properties”, Diamond & Related Materials 84 (2018) 77–85. https://doi.org/10.1016/j.diamond.2018.03.009
20- J. Neves, “Technologia Textile", LLS Edn., Porto, Portugal; Vol. l; (1982).
21- The Society of dyer and colorists; “Standard methods for the Assessment of color fastness of textiles”, Third Report of the fastness tests coordinating committee, Yorkshire, England, (1955), 71, p.24
22- AATCC Test Method 8-1996; International Organization for Standardization (ISO) 105X12.
23- AATCC test method 36-1972; International Organization for Standardization (ISO) 105-C06 A2S: 1994 standards.
24- AATCC 15: 2009; International Organization for Standardization ISO 105 E04 :2013.
Pransilp P, Pruettiphap M, Bhanthumnavin W, Paosawatyanyong B, Kiatkamjornwong S. Surface modification of cotton fabrics by gas plasmas for color strength and adhesion by inkjet ink printing. Appl Surf Sci 2016;364:208–20.
)
View on SCiNiTO