تأثير اختلاف نسب الخلط ومعامل البرم علي خاصية التشعير في الخيوط المنتجة

نوع المستند : Original Article

المؤلفون

1 أستاذ التصميم ورئيس قسم الغزل والنسيج والتريكو- كلية الفنون التطبيقية- جامعة بنها

2 أستاذ الغزل المساعد بمعهد بحوث القطن مركز البحوث الزراعية

3 مهندسة بقسم الغزل والنسيج

المستخلص

إن تعريف عملية برم الخيوط هو إعطاء الخيوط القوة اللازمة لتحمل الشدد الذي تتعرض له اثناء عملية الإنتاج ثم مرحلة النسيج ، ويجب ان يتوافر في الخيط المنتج حد ادني من قوة الشد حتي في حالة الخيوط التي تستخدم كلحمات والتي لا تكون معرضة لاجهادات كثيرة اثناء مراحل الإنتاج المختلفة (4)
والهدف الرئيسي والأساسي في عملية الخلط هو انتاج خيوط وأقمشة ذات خواص جيدة لا يمكن الحصول عليها باستعمال نوع واحد فقط من الخامات (6،7،5)، وكلما ذادت احدي الصفات المرغوبة بزيادة نسبة خامة معينة في الخلطة فإن ذلك يؤدي إلي نقص إحدي الصفات الأخرى نتيجة لقلة نسبة الخامة المقابلة (7).
ويهدف هذا البحث الي توفير خصائص الخيوط المخلوطة المنتجة بنمر متوسطة ثابتة (نمرة 30 انجليزي) وباستخدام اربع معاملات برم مختلفة للخيوط المنتجة (2,5، 3، 4، 4,5) حيث قام الباحث بإنتاج تسع خلطات وهما  القطن 100%، الفسكوز 100%، البوليستر 100%، 35% بوليستر: 65% فسكوز، 35% فسكوز: 65% بوليستر، 35% قطن: 65% فسكوز، 65% قطن: 35% فسكوز، 35% قطن: 65% بوليستر، 65% قطن: 35% بوليستر. واجمالي العينات 36 عينة ثم اجراء اختبارات معملية علي تلك الخيوط لقياس خاصية التشعير.

الكلمات الرئيسية


Mohamed Sabry - Textile Tests - Syndicate of Applied Arts Designers -2003.
2- Mohamed Ahmed Sultan, Textile Raw Materials, Mansha’at Al Maaref - Alexandria, 1990.
3- Muhammad Ahmed Sultan, Textile Fibers, Mansha’at al-Maaref - Alexandria, 1977.
4-  J.Gordon cook- Hand Book of textile fibers – Natural Fibers – 1993.
5-  Vinzanekar S.G,Ajgaonkar D.B,.Talukdar M.k.and Kothawala K.C",.realisation of fiber properties into blended yarns and fabrics ,"An international textile conference (belended textiles ) India ,November 18-20 (1981).
6-    Ranganathan S.R.and Vengsarker S.R",.Fibre interactions in blended yarns ," An international textile conference (belended textiles ),India ,November 18-20th,1981.
7-  Duckett K.E ,.Goswami B.C,.and Ramey H.H,.J.R",.Mechanical properties of cotton /polyester yarns ,"Text .res .J.vol .49 ,1979,p.262.
8-  - Goswami, B.C., Martindal, J., Scaraina F.L., ،، Textile yarns – Technology , structure and Application ’’, London,1977.
9-  Hearle,  J.W.S.,  and Groseberg,  P., ‘‘ Structural Mechanics of Fibers , yarns , and Fabrics ’’ , New Yourk , 1969.
 
10- Zerrin-Mehmet – Textile in general ( fiber- yarn – weaving ) – T.K.A.M- Textile and clothing Research center – 1988.
11- Cotton perfected" ,-class of the mass market,America’s textile international ,May 1986 , p.24
12- Vinzanekar S.G,Ajgaonkar D.B,.Talukdar M.k.and Kothawala K.C",.realisation of fiber properties into blended yarns and fabrics ,"An international textile conference (belended textiles ) India ,November 18-20 (1981).
13- Ranganathan S.R.and Vengsarker S.R",.Fibre interactions in blended yarns ," An international textile conference (belended textiles ),India ,November 18-20th,1981.
14- Duckett K.E ,.Goswami B.C,.and Ramey H.H,.J.R",.Mechanical properties of cotton /polyester yarns ,"Text .res .J.vol .49 ,1979,p.262.
15- Hearle, J. W. S, Grosberg, P., and Backer, S., Structural Mechanics of
Fibres, Yarns, and Fabrics, Vol. 1, Chap. 3, Wiley-Interscience, New
York, 148, 1969.
16- Chattopadhyay and S. Banerjee. “The Frictional Behavior of Ring-,
Rotor-, and Friction-spun Yarn.” J. Text. Inst. 1996, 87, Part 1, No. 1, 66.
 17- Barrela, A., Tura, J. M., and Vigo, J., Belts in open-end yarns: Influence of rotor diameter and statistical distribution, Text. Res. J., 6, 389–393,
1977.