استخدام ألياف السيركيولوز في إنتاج أقمشة الدينيم في إطار إدارة النفايات النسجية: دراسة حالة بمصنع النسيج DNM

نوع المستند : Original Article

المؤلف

كليه الفنون التطبيقية - جامعة دمياط - مصر

المستخلص

صناعة النسيج لها تأثير بيئي هائل، ليس فقط لأنها تستهلك كميات هائلة من المواد الخام والنفايات السائلة، ولكن أيضًا لأن كل قطعة نسيج يتم إنتاجها تضيف في النهاية إلى العدد الهائل من نفايات النسيج. يهدف هذا البحث إلى دراسة كيفية إعادة تدوير نفايات النسيج وإعادة استخدامها في صناعة النسيج. تم إجراء هذا البحث من خلال دراسة ميدانية لمصنع DNM للغزل والنسيج والصباغة في دمياط الجديدة، مصر، حيث تم إنتاج خيوط من ألياف السيركيولوز المعاد تدويرها والممزوجة بألياف القطن واستخدامها كخيوط لحمة لإنتاج أقمشة الدينيم ذات تراكيب نسجية مختلفة (نسيج مبرد 1/3 - نسيج أطلس 4 - نسيج مبرد 2/2 ونسيج سن ممتد 2/ 2 في كلا الاتجاهين) ومقارنتها بعينات منتجة من نفس التراكيب النسجية بخيوط التنسيل المخلوطة بالقطن كألياف تقليدية مستخدمة بالفعل كخيوط لحمة وذلك في تكلفة الألياف والخصائص الميكانيكية للأقمشة المنتجة. وأظهرت النتائج أن تكلفة ألياف السيركيولوز أقل من تكلفة ألياف التنسيل بنسبة 21.88%، كما حقق خليط السيركيولوز/القطن معامل جودة متقارب مع التنسيل/القطن في الخواص الميكانيكية بنسبة فرق 1.21%.

الكلمات الرئيسية


1-     Siti Hajar Mohamed, Md. Sohrab Hossain, Mohamad Haafiz Mohamad Kassim, Mardiana Idayu Ahmad, Fatehah Mohd Omar, Venugopal Balakrishnan, Muzafar Zulkifli and Ahmad Naim Ahmad Yahaya.” Recycling Waste Cotton Cloths for the Isolation of CelluloseNanocrystals: A Sustainable Approach”, Polymers Journal, 13(4), 2021, P2:17, Doi.org/10.3390/polym13040626
2-     Ana Briga-Sa, David Nascimento, Nuno Teixeira, Jorge Pinto, Fernando Caldeira, Humberto Varum, Anabela Paiva.” Textile waste as an alternative thermal insulation building material solution”, Construction and Building Materials Journal, 38 (2013) P155:160, Doi.org/10.1016/j.conbuildmat.2012.08.037
3-     Shayan Abrishami, Armineh Shirali, Nicole Sharples, Gulsah Ekin Kartal, Lisa Macintyre and Omid Doustdar.” Textile Recycling and Recovery: An Eco-friendly Perspective on Textile and Garment Industries Challenges”, Textile Research Journal, (2024), P 1:20, DOI:10.1177/00405175241247806
4-     May Kahoush, Nawar Kadi.”  Towards sustainable textile sector: Fractionation and separation of cotton/ polyester fibers from blended textile waste”, Sustainable Materials and Technologies Journal, 34 (2022), P 1:12, Doi.org/10.1016/j.susmat. 2022.e00513
5-     Nattha Pensupa, Shao-Yuan Leu, Yunzi Hu,Chenyu Du, Hao Liu, Houde Jing, Huaimin Wang and Carol Sze Ki Lin.” Recent Trends in Sustainable Textile Waste Recycling Methods: Current Situation and Future Prospects”, Springer International Publishing, (2017) P189:228, DOI 10.1007/s41061-017-0165-0
6-     Gizem Celep, Gamze D. Tetik and Fulya Yilmaz.” Limitations of Textile Recycling: The Reason behind the Development of Alternative Sustainable Fibers”, Next-Generation Textiles, P1:26, DOI: http://dx.doi.org/10.5772/intechopen.105118
7-     Rivalani Baloyi Baloyi, Oluwatoyin Joseph Gbadeyan, Bruce Sithole1 and Viren Chunilall.” Recent advances in recycling technologies for waste textile fabrics: a review”, Textile Research Journal (2024), 94(3–4), P508:529, DOI: 10.1177/00405175231210239
9-     Edvin Ruuth, Miguel Sanchis-Sebastiá, Per Tomas Larsson, Anita Teleman,Amparo Jiménez Quero, Sara Delestig 4, Viktor Sahlberg 4, Patricia Salén 4, Marjorie Sanchez Ortiz,Simran Vadher and Ola Wallberg.” Reclaiming the Value of Cotton Waste Textiles: A New Improved Method to Recycle Cotton Waste Textiles via Acid Hydrolysis”, Recycling Journal, (2022), 7(57), P1:15, Doi.org/10.3390/recycling7040057
12-  "ISO 139 (2005), “Textiles-standard atmospheres for conditioning and testing”, available at: www.iso.org".
13-  "ASTM D-3776 (2017), “Standard test methods for mass per unit area (weight) of fabric”, ASTM International, PA, 1996, available at: www.astm.org".
14-  "ASTM D-5034, “Standard test methods for breaking strength and elongation of textile fabrics”, ASTM International, PA, available at: www.astm.org".
15-  "ASTM D3107 (2019), “Standard test methods for stretch properties of fabrics woven from stretch yarns”, ASTM International, PA, available at: www.astm.org".
16-  "ASTM D1424, “Standard test methods for tearing strength of fabrics by falling - pendulum”, ASTM International, PA, available at: www.astm.org".
17-ASTM D4032-08. "ASTM D4032-08 (2017), “Standard test methods for stiffness of fabric by the circular bend procedure”, ASTM International, PA, available at: www.astm.org".