1. Alkuazi, Salah .(2017): altakamul bayn mudakhalaa alhandasat aleaksiat walkulfat ealaa 'asas alkhasayis - dirasatan tatbiqiatan fa alsharikat aleamat lilsinaeat al'iiliktruniat ,bahath manshur ,majalat al'iidarat walaiqtisadi, almujalid alkhamis , aleadad alttasie eshr, aleiraq
2. Carmignato, S., Dewulf, W., & Leach, R. (2018). Industrial X-ray computed tomography: Springer
3. Datar, S. M., & Rajan, M. V. (2018). Horngren’s cost accounting: a managerial emphasis: Pearson.
4. De Chiffre, L., Carmignato, S., Kruth, J.-P., Schmitt, R., & Weckenmann, A. (2014). Industrial applications of computed tomography. CIRP annals, 63(2), 655-677.
5. Flisch, A., Wirth, J., Zanini, R., Breitenstein, M., Rudin, A., Wendt, F., . . . Golz, R. (1999). Industrial computed tomography in reverse engineering applications. DGZ-fP-Proceedings BB, 4(7), 45-53.
6. Horngren, C. T. (2009). Cost accounting: A managerial emphasis, 13/e: Pearson Education India.
7. Kruth, J. P., Bartscher, M., Carmignato, S., Schmitt, R., De Chiffre, L., & Weckenmann, A. (2011). Computed tomography for dimensional metrology. CIRP annals, 60(2), 821-842.
8. Kumar, A., Jain, P. K., & Pathak, P. M. (2013). Reverse engineering in product manufacturing: an overview. DAAAM international scientific book, 39, 665-678.
9. Mahmawad, Hanaa.(2018): tuknulujiaa altaswir bialasheae- albarnamaj altadribaa litahil almudrisin bimudrisat aldabeat alfaniyat liltuknulujia alnawawita-murkiz albihwth alnawawiat -hyiat alttaqat aldhariyat - jumhuriat misr alearabiati.
10. Noel, J. (2008). Advantages of CT in 3D scanning of industrial parts. 3D Scanning Technologies Magazine, 1(3), 18-23
11. Pal, D., Ravi, D. B., Bhargava, L., & Chandrasekhar, U. (2005). Computer-Aided Reverse Engineering for Rapid Replacement Parts: A Case Study. Defence Science Journal.
12. Raja, V. (2008). Introduction to reverse engineering. In Reverse Engineering (pp. 1-9): Springer.
13. Sadaoui, S. E., Mehdi-Souzani, C., & Lartigue, C. (2018). Combining a touch probe and a laser sensor for 3D part inspection on CMM. Procedia CIRP, 67, 398-403.
14. https://www.kau.edu.sa/Content-0012720-AR-85050 (Accessed 22/1/2021)
)
View on SCiNiTO